© 2020 Bates Water Solutions Inc.
Contact us at 630-964-1539 to
find out more information, or
download our pdf brochure.
1-Building Engineer:
We talk to the building engineer to ask
about the system and any problems causing
them concern. We will check any maintenance
logs available.
3-Water Quality Check:
Water is tested for hardness, iron and
TDS both before and after the water equipment.
2-Exterior System Check:
Piping, valves and tanks are inspected for leaks,
corrosion and exterior damage.
4-Valve operation check on
Softener and Filter:
Flow patterns for regeneration and service
cycles are checked for proper operation.
Each cycle will be started for a short time
period: Service cycle, Backwash cycle,
Brine/Rinse cycle, Flush cycle. Pre-filter(s)
are inspected and changed if needed.
Pressure tubing to valves is inspected.
System is checked for leaking to drain.
6-Brine System Check:
Brine tank and brine level in the tank are
inspected. Brine valve is inspected
Brine draw and rate is observed.
7-R/O Operation (if required):
A complete inspection of pressures, flows,
meter readings, pressure gauges and settings
will be done. Adjustments will be
made as needed.
8-Report:
A complete report is issued after each
inspection. All P.M. and service preformed
will be documented on a BWS Operation Log.
5-Controls Check:
Controls are observed for proper operation
and programming. Adjustments are made
as needed. All controls are manually stepped
through operations and reviewed for
proper programming.
9-Training:
Training on the sequence of operation of
the existing system shall be provided for
new or existing personnel on request.
Your water equipment has no control over
when it will break down. But as we all
know, there is no good time. It will always
cause some costly side effects like:
production downtime, customer
complaints, etc. But keeping an eye on the
equipment, by using our BWS
Preventative Maintenance could
really help. Now is a good time to sign-up.
Below are the services included:
BWS Preventative
Maintenance (PM)
Protect your equipment